Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
Evaporator Case: Service and Repair
Removal and Installation
Intake Unit
REMOVAL
1. Using refrigerant recovery system, discharge refrigerant.
2. Disconnect ground cable from battery.
3. Remove bolts securing expansion valve and pipe in engine compartment.
4. Remove instrument panel.
5. Remove keyless unit and CRU unit.
6. Disconnect sunroof connector.
7. Disconnect servo motor connector.
8. Disconnect heater blower power transistor connector.
9. Disconnect heater blower motor connector.
