subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Air Bag(s) Arming and Disarming|Service Precautions|Page 1021 > < Brake Bleeding|Service and Repair|Page 1017
Page 1
background image

Air Bag(s) Arming and Disarming: Service Precautions

CAUTION:

-

When servicing a vehicle, be sure to turn the ignition switch OFF, disconnect the ground cable from the battery, and wait for more than 20
seconds
 before starting work.

-

The airbag system is fitted with a backup power source. If the airbag system is serviced within 20 seconds after the ground cable is disconnected,
it may inflate.

-

If sensors, air bag module, airbag control module, pretensioner and harness are deformed or damaged, replace them with new genuine parts.

-

Do not use the airbag system and pretensioners on other vehicles. When replacing parts, be sure to replace them with new parts.

-

When checking the system, be sure to use a digital circuit tester.
Use of an analog circuit tester may cause the airbag to activate erroneously.

Air Bag(s) Arming and Disarming|Service Precautions|Page 1021 > < Brake Bleeding|Service and Repair|Page 1017