Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
-
Do not check continuity of the airbag module (driver, passenger, and side, pretensioner).
-
The removed front seat with the airbag module must be kept at least 200 mm (8 in) away from walls and other objects.
-
Do not use the airbag or pretensioner parts from other vehicles. Always replace parts with new parts.
-
Do not re-use deployed airbag or pretensioner again.
-
When painting or performing sheet metal work on the front part of the vehicle, including the front wheel apron, front fender, and front side frame,
take utmost care not to apply paint or the flame of the welding burner directly to the front sub sensors and wire harness of the airbag system.
-
When painting or performing sheet metal work on the side of the vehicle, including the side sill, center pillar, and front and rear doors, take utmost
care not to apply paint or the flame of the welding burner directly to the side airbag sensors and wire harness of the airbag system.
