Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
10. Disconnect grommet from toe board.
NOTE: From inside compartment, push grommet into hole.
11. Pull out the cable from the toe board hole.
12. Disconnect accelerator cable bushing from accelerator pedal lever.
13. Disconnect accelerator cable stopper from bracket
14. Separate accelerator cable and bracket.
B: INSTALLATION
1. Install in the reverse order of removal.
CAUTION:
^
If cable clamp is damaged, replace it with a new one.
^
Never fail to cover outer cable end with boot.
^
Be careful not to kink accelerator cable.
^
Always use new clevis pins.
