Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
Fuel Temperature Sensor: Service and Repair
FUEL TEMPERATURE SENSOR
REMOVAL
WARNING: During work procedures, if fuel tank is more than 3/4 full, be careful because fuel may spill.
NOTE: Fuel temperature sensor is built in fuel pump assembly.
1. Remove fuel pump assembly.
2. Disconnect connector from fuel pump bracket.
3. Remove fuel temperature sensor.
NOTE: When replacing fuel temperature sensor, also replace fuel level sensor.
INSTALLATION
1. Install in the reverse order of removal.
WARNING:
-
Ground cable must be connected.
-
Spark may occur and ignite if fuel is nearby.
