subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Spark Plug|Removal and Installation|Page 2934 > < Spark Plug|Removal and Installation|Page 2932
Page 4
background image

6. Remove spark plug with the spark plugs socket.

INSTALLATION

RH SIDE

1. Install in the reverse order of removal. 

 

Tightening torque (Spark plug):  20.6 N.m (2.10 kgf-m, 15.2 ft-lb)

CAUTION:  The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the
torque should be reduced by approximately 1/3 of the specified torque in order to avoid over-stressing.

LH SIDE

1. Install in the reverse order of removal. 

Tightening torque (Spark plug):  20.6 N.m (2.10 kgf-m, 15.2 ft-lb)

CAUTION:  The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the
torque should be reduced by approximately 1/3 of the specified torque in order to avoid over-stressing.

Spark Plug|Removal and Installation|Page 2934 > < Spark Plug|Removal and Installation|Page 2932