Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
Starter Motor: Testing and Inspection
INSPECTION
1. ARMATURE
1. Check commutator for any sign of burns of rough surfaces or stepped wear. If wear is of a minor nature, correct it by using sand paper.
2. Run-out test
Check the commutator run-out and replace if it exceeds the limit.
Commutator run-out:
Standard
0.02 mm (0.0008 in), or less
Service limit Less than
0.05 mm (0.0020 in)
3. Depth of segment mold Check the depth of segment mold.
Depth of segment mold:
0.6 mm (0.024 in)
Limit
0.2 mm (0.008 in)
4. Armature short-circuit test
Check armature for short-circuit by placing it on growler tester. Hold a hacksaw blade against armature core while slowly rotating armature. A
