Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
1. Rotate bearing by hand; no binding should exist.
2. Rotate bearing rapidly; no abnormal noise should be heard.
6. MAGNETIC SWITCH
CAUTION:
-
The following magnetic switch tests should be performed with specified voltage applied.
-
Each test should be conducted within 3 to 5 seconds. Power to be furnished should be one-half the rated voltage.
1. Pull-in test
Connect two battery negative leads onto magnetic switch body and terminal C respectively. Then connect battery positive lead onto terminal
50. Pinion should extend when lead connections are made.
2. Holding-in test
Disconnect lead from terminal C with pinion extended. Pinion should be held in the extended position.
3. Return test
