subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Steering - Power Steering Groan/Vibration|Page 4952 > < Steering - Power Steering Groan/Vibration|Page 4946
Page 1
background image

Power Steering Line/Hose: All Technical Service Bulletins
Steering - Power Steering Groan/Vibration

NUMBER: 04-11-04 
DATE: 01/15/04

APPLICABILITY: 
2000-2002MY Legacy Sedan, Wagon and Outback Vehicles w/ 2.5L Engines

SUBJECT:
Power Steering Hose - New Style

INTRODUCTION

The purpose of this bulletin is to address an abnormal noise (groan) coming from the power steering pump and/or slight vibration in the steering wheel
when turning at very low speeds.

PRODUCTION LINE CHANGE

The new style hose assembly was used in production starting in April, 2002 with the VINs shown.

PART NUMBER INFORMATION

REPAIR PROCEDURE/INFORMATION

Remove the bolt (A) and clamps (B) that secure the high-pressure power steering hose (Figure 1) and confirm if the abnormal noise and/or vibration
have been reduced. If so, leave the damps off; no further action is required.

If the abnormal noise and/or vibration have not been reduced, replace the high-pressure power steering hose with the updated hose, P/N 34610AE09B
and leave the clamps off. If, after replacing the hose the abnormal noise and/or vibration is still evident, replace the power steering pump.

CLAIM REIMBURSEMENT / WARRANTY INFORMATION

For vehicles within the Basic New Car Warranty period, refer to the Warranty Labor Time Guide for claim information.

Steering - Power Steering Groan/Vibration|Page 4952 > < Steering - Power Steering Groan/Vibration|Page 4946