Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
Steering Gear Seal: Service and Repair
REPLACEMENT
Valve Housing Oil Seal
Specified steering grease: VALIANT GREASE M2 (Part No. 003608001)
1. Pry off dust seal using screwdriver.
2. Remove snap ring using snap ring pliers.
3. Pry off oil seal using screwdriver.
CAUTION: After removing, check inside surface of valve housing for damage. If oil seal contacting surface is damaged, replace valve housing
with a new one.
4. Press-fit oil seal into valve housing using ST and press.
ST 927610000 INSTALLER
NOTE: Before fitting, coat oil seal fully with ATF DEXRON IIE or ATF DEXRON III.
5. Fit snap ring in snap ring groove using snap ring pliers.
CAUTION: Be careful not to scratch oil seal with snap ring pliers.
NOTE: Rotate snap ring to check for proper installation.
Pinion and Valve Assembly