Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
Control Arm: Service and Repair
Rear Suspension
Link Upper
REMOVAL
1. Loosen wheel nuts. Lift-up vehicle and remove wheel.
2. Use transmission jack to support rear arm horizontally.
3. Remove bolt securing link upper to sub frame.
4. Remove bolts which secure link upper to rear arm and detach link upper.
INSTALLATION
Install in the reverse order of removal, observing the following instructions.
CAUTION:
^
Using transmission jack, support rear arm horizontally, install link upper and tighten nuts to specified torque.
^
Tighten nut when installing adjusting bolt.
^
Replace self-locking nut.
NOTE: Check wheel alignment and adjust if necessary.
