Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
8. Remove bolts securing link rear to sub frame, detach link rear.
CAUTION: To loosen adjusting bolt, always loosen nut while holding the head of adjusting bolt.
INSTALLATION
Install in the reverse order of removal, observing the following instructions.
CAUTION:
^
Using transmission jack, support rear arm horizontally, install link rear and tighten nuts to specified torque.
^
Tighten nut when installing adjusting bolt.
^
Replace self-locking nut.
NOTE: Check wheel alignment and adjust if necessary.
DISASSEMBLY
Using ST-A, B, press bushing out of place.
ST-A, B 20099AE000 INSTALLER & REMOVER
ASSEMBLY
Using ST, press bushing into place.
