subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Recall - Rear Subframe Corrosion|Page 5133 > < Recall - Rear Subframe Corrosion|Page 5131
Page 3
background image

Additional quantities of the rust-proofing material will be available through the "Genuine Subaru Automotive Chemical" program on Subarunet after
6/21/03. In order to maintain an adequate part supply, SOA requests that Dealers only order quantities necessary to satisfy anticipated demand.

RECALL CAMPAIGN IDENTIFICATION LABEL

Type or print the necessary information on a Recall Campaign identification label. The completed label should be attached to the vehicle's upper radiator
support.

A quantity of labels is provided to each dealer with this bulletin. Additional labels are available through your Regional / Distributor Service Office.

CLAIM REIMBURSEMENT AND ENTRY PROCEDURES

Credit for performing this recall campaign will be based on the submission of properly completed repair order information. Dealers may enter the
applicable claim information through their Dealer Communications System.

Listed below is claim entry information

Clean and Rust-proof Rear Suspension Sub-frame - Use the following information for claim submission:

Enter labor operation 161-251 for 0.9 labor hours.

Enter the applicable part number. Parts will be reimbursed at dealer cost plus applicable handling allowance.

Recall - Rear Subframe Corrosion|Page 5133 > < Recall - Rear Subframe Corrosion|Page 5131