Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
Ventilation
General and local exhaust.
Personal Protective Equipment
Caution:
Avoid prolonged skin contact.
Protective Gloves: Impervious gloves (Viton, PVOH, etc.)
Eye Protection: Safety glasses with side-shields or chemical goggle.
Other Protective Clothing or Equipment: If splashing is anticipated, wear a rubber apron and boots or other protective equipment to minimize contact.
Necessary tools and supplies:
SPRAY EQUIPMENT OPERATING INSTRUCTIONS
The pressure pot is equipped with an adjustment valve (or stop screw) to adjust the ratio of product to air. This adjustment valve will have to be adjusted
in order to achieve optimal spray pattern for each material. The adjustment valve is identified in the diagram.
Before filling the gun, turn the stop screw clockwise until completely closed. Draw a line down the middle of the stop screw using a marker. This line
will be used to determine the number of turns needed for optimal spray of the waxes.
Settings For Nox-Rust(R) X-210 Corrosion Preventive Penetrant
When using the 360° flexible wand, turn the stop screw counterclockwise 1/2 turn from dosed, and adjust the air supply pressure to 40 psi.
Settings For Nox-Rust(R) X-121 Black Corrosion Preventive Coating
(Note: Product should he room temperature for proper application.)
