subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Front Suspension|Page 5171 > < Front Suspension|Page 5169
Page 4
background image

Damper Strut 
1. Check for oil leakage.
2. Move the piston rod up and down to check it operates smoothly without any binding.
3. Play of piston rod

^

Measure the play as follows:

Fix outer shell and fully extend the rod. Set a dial gauge at the end of the rod: L [10 mm (0.39 inch)], then apply a force of W [20 N (2 kg, 4 lb)] to
threaded portion. With the force of 20 N (2 kg, 4 lb) applied, read dial gauge indication: P1. Apply a force of 20 N (2 kg, 4 lb) in the opposite
direction of "W", then read dial gauge indication: P2.

The free play is determined by the following equation:
Play = P1, P2
Limit of play. Less than 0.8 mm (0.031 inch) 
If the play is greater, replace the strut.

Strut Mount 
Check rubber part for creep, cracks and deterioration, and replace it with new one if defective.

Dust Cover 
If any cracks or damage are found, replace it with a new one.

Coil Spring 
One having permanent strain should be replaced with a new one. When vehicle posture is uneven, although there are no considerable reasons like tire
puncture, uneven loading, etc., check coil spring for its free length referring to specifications, cracks, etc., and replace it with a new one if defective.

Helper 
Replace it with new one if cracked or damaged.

Front Suspension|Page 5171 > < Front Suspension|Page 5169