Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
13. Loosen nut securing rear link to rear arm.
14. Loosen nut securing upper link to rear arm.
15. Remove bolts securing rear arm to links and remove rear arm.
INSTALLATION
1. Use a transmission jack to support the rear arm.
2. Install rear arm and temporarily tighten bolts securing rear arm to links.
3. Install bearing unit.
4. Install bolt securing ABS sensor to rear arm.
5. Install bolt securing brake hose to rear arm.
6. Install bolt securing parking brake cable clamp to rear arm.
7. Place jack (furnished with vehicle) upside down and position it between link rear and sub frame. Adjust jack position so rear shock absorber is
aligned with rear arm at their corresponding holes. Install lower shock absorber bolts.
CAUTION: Put a cloth between jack and its mating area to protect link rear and sub frame from scratches.
8. Using transmission jack, support rear arm horizontally and tighten nuts and bolts securing rear arm, link front, link rear, link upper and shock
absorber.
NOTE: Check wheel alignment and adjust if necessary.
