Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
4. Remove bolts which secure link front to rear arm and detach link front.
NOTE: Link front bushing cannot be replaced alone. Always replace link front and bushing as a single unit.
INSTALLATION
Install in the reverse order of removal, observing the following instructions.
CAUTION:
^Using transmission jack, support rear arm horizontally, install link front and tighten nuts to specified torque.
^
Install link front with protruded side facing front.
^
Replace self-locking nut.
NOTE: Check wheel alignment and adjust if necessary.
INSPECTION
Visually check link front for damage or bends.
Stabilizer Link Rear
REMOVAL
1. Loosen wheel nuts. Lift-up vehicle and remove wheel.
