Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
8. Using ST, press hub bolt out.
ST 927080000 HUB STAND.
CAUTION: Be careful not to hammer hub bolts. This may deform hub.
INSPECTION
Check the removed parts for wear and damage. If defective, replace with a new one.
CAUTION:
^
If a bearing is faulty, replace it as the bearing set.
^
Be sure to replace oil seal at every overhaul.
ASSEMBLE
1. Using ST, press new hub bolt into place.
CAUTION:
^
Ensure hub bolt closely contacts hub.
^
Use a 12 mm (0.47 inch) hole in the ST to prevent hub bolt from tilting during installation.
2. Remove foreign particles (dust, rust, etc.) from mating surfaces of hub and tone wheel, and install tone wheel to hub (only vehicle equipped with
ABS).
CAUTION:
^
Ensure tone wheel closely contacts hub.
^
Be careful not to damage tone wheel teeth.
