Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
3. Using ST, remove ATF filter.
ST 498548500 OIL FILTER WRENCH
4. Get new ATF filter and apply a thin coat of ATF to the oil seal
^
ATF Filter Assembly
1. Remove battery.
2. Drain ATF completely.
3. Remove front left mud guard.
4. Release clamp of IN, OUT of oil filter hose, and remove hose from pipe.
NOTE:
^
Plug the pipe.
^
Put a mark etc., to distinguish IN, OUT on pipe and hose.
5. Remove oil filter bracket installation nut.
6. Remove ATF filter assembly.
7. Using ST, remove ATF filter.
ST 498548500 OIL FILTER WRENCH
8. Get new ATF filter and apply a thin coat of ATF to the oil seal.
B: INSTALLATION
1. 2.5L MODEL
1. Install ATF filter. Turn it by hand, being careful not to damage oil seal.
2. Using ST, tighten ATF filter to transmission case.
Calculate ATF filter torque specifications using the following formula.
T2 = L1/(L1 + L2) x T1
T1: 14 Nm (1.4 kgf-m, 10.1 ft. lbs.)
[Required torque setting]
T2: Tightening torque
L1: ST length 0.078 m (3.07 inch)
L2: Torque wrench length
