Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
2. Connect harness connectors at 9 places. Connect connectors of same color, and secure connectors to valve body sing clips.
3. Apply proper amount of liquid gasket to the entire oil pan mating surface.
Fluid packing: Three Bond 1217B
4. Install the oil pan.
Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)
5. Install the front and rear vehicle speed sensor, and also the torque converter turbine speed sensor, and then fasten the harness.
Tightening torque: 7 Nm (0.7 kgf-m, 5.1 ft. lbs.)
6. Install oil cooler outlet pipe.
CAUTION: Be sure to use a new aluminum washer.
Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)
7. Install transmission rear crossmember bolts.
Tightening torque: 75 Nm (7.6 kgf-m, 55 ft. lbs.)
8. Install propeller shaft.
9. Install shield cover.
10. Install front, center, rear exhaust pipe and muffler.
11. Install the transmission connector to the stay.