Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
8. Tilt lever forward and pull down to separate it from frame.
9. Remove spring.
CAUTION: Wear goggles. Do not allow spring to fly out during removal.
10. Remove bolt and then disconnect lever upper and lever lower.
D: ASSEMBLY
1. Clean all parts before assembly.
2. Apply grease [MULITEMP AC-D or equivalent] to each parts.
3. Assembly is in the reverse order of disassembly.
4. After completion of fitting, transfer selector lever to range "P" - "1", then check whether the indicator and selector lever agree, whether operating
force is.