Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
Clutch Release Bearing: Service and Repair
A: REMOVAL
1. Remove transmission assembly from vehicle body.
2. Remove the two clips from clutch release lever and remove release bearing.
CAUTION: Be careful not to deform clips.
3. Remove release lever seal.
4. Remove release lever retainer spring from release lever pivot with a screwdriver by accessing it through clutch housing release lever hole. Then
remove release lever.
B: INSTALLATION
CAUTION:
Before or during assembling, lubricate the following points with a light coat of grease.
^
Contact surface of lever and pivot
^
Contact surface of lever and bearing
^
Transmission main shaft spline (Use grease containing molybdenum disulphide.)
^
Contact surface of lever and operating cylinder
1. While pushing release lever to pivot and twisting it to both sides, fit retainer spring onto the constricted portion of pivot.