Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
Drive/Propeller Shaft: Service Precautions
C: CAUTION
^
Wear working clothing, including a cap, protective goggles, and protective shoes during operation.
^
Remove contamination including dirt and corrosion before removal, installation or disassembly.
^
Keep the disassembled parts in order and protect them from dust or dirt.
^
Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly, and replacement.
^
Be careful not to burn your hands, because each part on the vehicle is hot after running.
^
Use SUBARU genuine grease etc. or the equivalent. Do not mix grease etc. with that of another grade or from other manufacturers.
^
Be sure to tighten fasteners including bolts and nuts to the specified torque.
^
Place shop jacks or safety stands at the specified points.
^
Apply grease onto sliding or revolution surfaces before installation.
^
Before installing O-rings or snap rings, apply sufficient amount of grease to avoid damage and deformation.
^
Before securing a part on a vice, place cushioning material such as wood blocks, aluminum plate, or shop cloth between the part and the vice.
