subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Transmission Mount, M/T|Testing and Inspection|Page 4025 > < Shift Rail, M/T|Service and Repair
Page 1
background image

Transmission Mount: Testing and Inspection

C: INSPECTION 

Repair or replace parts if the results of the inspection below are not satisfactory.

1. PITCHING STOPPER 
Make sure that the pitching stopper is not bent or damaged. Make sure that the rubber is not stiff, cracked, or otherwise damaged.

2. CROSSMEMBER AND CUSHION RUBBER 
Make sure that the crossmember is not bent or damaged. Make sure that the cushion rubber is not stiff, cracked, or otherwise damaged.

Transmission Mount, M/T|Testing and Inspection|Page 4025 > < Shift Rail, M/T|Service and Repair