subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Transmission Speed Sensor, A/T|Service and Repair|Page 4266 > < Service Manual Updates - Multiple Systems|Page 4262
Page 1
background image

Transmission Speed Sensor: Service and Repair

A: REMOVAL 

1. Disconnect battery ground cable.

2. Disconnect transmission connector.
3. Remove the transmission connector from stay.
4. Lift-up the vehicle.
5. Clean transmission exterior.

6. Drain ATF completely.

NOTE:  Tighten ATF drain plug after draining ATF.

Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.) 

7. Remove front, center, exhaust pipes and muffler.
8. Remove the shield cover.
9. Remove the propeller shaft.

Transmission Speed Sensor, A/T|Service and Repair|Page 4266 > < Service Manual Updates - Multiple Systems|Page 4262