Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
Wiper Motor: Service and Repair
Rear Wiper Motor
Rear Wiper Motor
REMOVAL
1. Remove rear wiper arm.
2. Remove cap (A), nut (B), and spacer (C) from rear wiper shaft.
3. Remove rear gate lower trim.
4. Unclip clip of harness and disconnect connector of wiper motor.
5. Loosen bolts to remove wiper motor assembly (A).
INSTALLATION
1. Install in the reverse order of removal.
2. Install rear wiper cushion with the arrow mark facing up, as shown in the figure.
