Legacy GT Sedan AWD F4-2.5L SOHC (2000)
4. Remove bolts which secure link upper to rear
B: DISASSEMBLY
Using ST, press bushing out of place.
ST 20099AE010 INSTALLER & REMOVER
C: INSPECTION
Visually check link upper for damage or bends.
D: ASSEMBLY
1. Using ST, press bushing into place.
ST 20099AE010 INSTALLER & REMOVER
CAUTION: Outer bushing has a "directional" design. Be sure to install bushing with longer inner housing side facing vehicle rear.
E: INSTALLATION
To install, reverse removal procedures, observing the following instructions.