Legacy L Wagon AWD F4-2.2L SOHC (1997)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Hydraulic Unit For ABS/TCS System
Removal
REMOVAL
1) Disconnect ground cable from battery.
2) Remove canister, air intake and air cleaner case duct from engine compartment to facilitate removal of hydraulic unit.
3) Disconnect brake pipes from hydraulic unit.
CAUTION: Wrap brake pipes with vinyl bag to avoid spilling brake fluid on vehicle body.
4) Disconnect connector from hydraulic unit.
5) Remove bolts which secure hydraulic unit bracket and remove hydraulic unit from engine compartment.
CAUTION:
-
Hydraulic unit cannot be disassembled. Do not attempt to loosen bolts and nuts.
-
Do not drop or bump hydraulic unit.
-
Do not turn the hydraulic unit upside down or place it on its side.