subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

On-Car Service|Page 4143 > < Brake Pedal Assy|Specifications|Page 4140
Page 1
background image

Brake Pedal Assy: Service and Repair
On-Car Service

ON-CAR SERVICE 

Clutch Pedal (2500 cc model) 

1) Push release fork until operating cylinder push rod retracts. Check that clutch fluid level in reservoir tank increases.
2) If clutch fluid level increases, hydraulic clutch play is correct.
3) If clutch fluid level does not increase or push rod does not retract, clutch pedal must be adjusted.
4) Check the fluid level on the outside of the clutch master cylinder tank. It the level is below "MIN", add clutch fluid to bring it up to "MAX".

Recommended clutch fluid:

FMVSS No.116, fresh DOT 3 or DOT 4 brake fluid 

On-Car Service|Page 4143 > < Brake Pedal Assy|Specifications|Page 4140