Legacy L Wagon AWD F4-2.2L SOHC (1997)
Brake Caliper: Service and Repair
Rear
REMOVAL
1. Lift-up vehicle and remove wheels.
2. Disconnect brake hose from caliper body assembly.
CAUTION: Do not allow brake fluid to come in contact with vehicle body; wipe off completely if spilled.
3. Remove lock pin.
4. Raise caliper body and move it toward vehicle center to separate it from support.
5. Remove support from back plate.
NOTE: Remove support only when replacing it or the rotor. It need not be removed when servicing caliper body assembly.
6. Clean mud and foreign particles from caliper body assembly and support.
CAUTION: Be careful not to allow foreign particles to enter inlet (at brake hose connector).
