Legacy L Wagon AWD F4-2.2L SOHC (1997)
Vacuum Brake Booster: Service and Repair
Removal
REMOVAL
1) Remove or disconnect the following parts at engine compartment.
(1) Disconnect connector for brake fluid level indicator.
(2) Remove brake pipes from master cylinder.
(3) Remove master cylinder installing nuts.
(4) Disconnect vacuum hose from brake booster.
2) Remove the following parts from the pedal bracket.
(1) Snap pin and clevis pin
(2) Four brake booster installing nuts
3) Remove brake booster while shunning brake pipes.
