subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Diagnostic Chart|Page 1606 > < Diagnostic Chart|Page 1604
Page 2
background image

TROUBLE SYMPTOM: 

-

Radiator main fan does not operate under the above condition.

1. CHECK FUSE AND POWER SUPPLY 
1) Check fuse No.13.
2) Turn ignition switch to ACC.
3) Measure voltage between fuse and relay box, and body.

Connector & terminal / Specified voltage:

(F40) No.3 - Body / 10 V, or more 

2. CHECK HARNESS CONNECTOR BETWEEN FUSE AND RELAY BOX, AND A/C RELAY HOLDER. 
1) Turn ignition switch to OFF.
2) Disconnect connectors from fuse and relay box, and A/C relay holder.
3) Measure resistance of harness connector between fuse and relay box, and A/C relay holder.

Connector & terminal / Specified resistance:

Diagnostic Chart|Page 1606 > < Diagnostic Chart|Page 1604