Legacy L Wagon AWD F4-2.2L SOHC (1997)
2. BELT TENSIONER AND IDLER
a. Installation of belt tensioner adjuster
1. Insert stopper pin 1.5 mm (0.059 inch) diameter into place while pushing adjuster rod into body using a press.
CAUTION:
^
Do not allow press pressure to exceed 9,807 N (2,205 lbs.).
^
Do not release press pressure until stopper pin is completely inserted.
^
Push belt tensioner adjuster rod vertically.
^
Press-in the push adjuster rod gradually taking three minutes or more.
2. Install belt tensioner adjuster to tensioner bracket.
b. Install belt tensioner assembly.
c. Install belt idler (No. 1).
