Legacy L Wagon AWD F4-2.2L SOHC (1997)
3. LUBRICATE THE COMPONENTS
For lubrication of the components, use apprpriate refrigerant oil. Apply oil from an oil squirt gun or other closed container. Do not use your finger
to spread the oil over the O-ring. Apply a small amount of refrigerant oil to the top and sides of the O-ring. The area covered by oil should include
the O-ring and the tube bead.
4. TORQUE THE FITTING
Using a back-up wrench in conjunction with a calibrated torque wrench, torque the connection to the midrange of the specification.
After completion of torquing, use a clean shop towel to remove any excess oil from the connection or any oil that may have dripped on the vehicle
body or other parts.
CAUTION: If a leak is suspected after torquing, do not retighten or retorque the connection. Instead, disassemble the connection, remove the
O-ring, and inspect the O-ring, threads, joints and seating surfaces.
