subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Brake Lamp|Service and Repair > < Diagram Information and Instructions|Page 5893
Page 2
background image

1. Disconnect connector of stop light switch from body harness.
2. Check continuity between terminals when push rod is pushed in 1.2 to 3.2 mm (0.047 to 0.126 in) from end of outer case.

2. COMBINATION SWITCH (ON-CAR)

Refer to inspection of combination switch.

3. TAIL AND ILLUMINATION RELAY

Check continuity between terminals as indicated in table, when connecting battery to terminal No.1 and No.3

Brake Lamp|Service and Repair > < Diagram Information and Instructions|Page 5893