Legacy L Wagon AWD F4-2.2L SOHC (1997)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
IDLE AIR CONTROL SOLENOID VALVE
REMOVAL AND INSTALLATION
1. Disconnect connector from Idle Air Control Solenoid Valve.
2. Disconnect Engine coolant hoses (1) from idle air control solenoid valve.
3. Disconnect Air By-Pass Hose (2) from idle air control solenoid valve.
4. Remove idle air control solenoid valve from throttle body.
5. Installation is in the reverse order of removal.
CAUTION: Replace gasket with a new one.
Tightening Torque: 6.4 ± 0.5 N.m (4.7 ± 0.4 ft-lb).
CLEANING
1. Start and warm-up the engine until radiator fan operates.
2. Hold Throttle valve so that engine speed is at 2,000 rpm.