Legacy L Wagon AWD F4-2.2L SOHC (1997)
5. Check Fuel Pump Relay.
a. Disconnect connectors from Fuel Pump relay and Main Relay .
b. Remove Fuel Pump relay and Main Relay with bracket.
c. Connect Battery to Fuel Pump relay connector terminals No. 1 and No. 3.
d. Measure resistance between connector terminals of Fuel Pump relay.
[CHECK]:Terminals:
No. 2 - No. 4/10 Ohms, or less.
[YES]:
Go to step 6.
[NO]:
Replace Fuel Pump relay.
6. Check harness connector between Engine Control Module (ECM) and Fuel Pump Relay.
a. Disconnect connectors from ECM.
b. Measure resistance of harness connector between ECM and Fuel Pump relay.
[CHECK]:Connector & terminal:
(B84) No. 84 - (B46) No. 3/10 Ohms, or less.
[NO]:
Repair harness between ECM and Fuel Pump relay connector.
[YES]:
Confirm good connection in ECM connector.