Legacy L Wagon AWD F4-2.2L SOHC (1997)
Transmission Position Switch/Sensor: Adjustments
1. Loosen the three inhibitor switch securing bolts.
2. Shift the select lever to the N range.
3. Insert ST as vertical as possible into the holes in the inhibitor switch lever and switch body.
ST 499267300 STOPPER PIN or equivalent.
4. Tighten the three inhibitor switch bolts.
Tightening Torque: 3.4 +/-0.5 Nm (2.5 +/-0.4 ft. lbs.).
5. Repeat the above checks. If inhibitor switch is determined to be "faulty", replace it.
