Legacy L Wagon AWD F4-2.2L SOHC (1997)
4) Remove brake hose clamp and disconnect brake hose from strut. Attach brake hose to body using gum tape.
5) Scribe an alignment mark on the camber adjusting bolt which secures strut to housing.
6) Remove bolt securing the A.B.S. sensor harness. (A.B.S. equipped models.)
7) Remove two bolts securing housing to strut.
CAUTION: While holding head of adjusting boll, loosen self-locking nut.
8) Remove the three nuts securing strut mount to body.
Disassembly
DISASSEMBLY
1) Using a coil spring compressor, compress coil spring.