Legacy L Wagon AWD F4-2.2L SOHC (1997)
9) Using hexagon wrench to prevent strut rod from turning, tighten self-locking nut with ST.
Tightening torque:
54 ± 5 Nm (5.5 ± 0.5 kg-m, 39.8 ± 3.6 ft-lb)
ST 927760000 STRUT MOUNT SOCKET
10) Loosen the coil spring carefully.
Installation
INSTALLATION
1) Install strut mount at upper side of strut to body and tighten with nuts.
Tightening torque:
20 ± 6 Nm (2.0 ± 0.6 kg-m, 14.5 ± 4.3 ft-lb)
2) Connect housing to lower side of strut.
3) Position aligning mark on camber adjusting bolt with aligning mark on lower side bracket of strut.
CAUTION:
-
While holding head of adjusting bolt, tighten self- locking nut.
-
Be sure to use new self-locking nut.
Tightening torque:
152 ± 20 Nm (15.5 ± 2.0 kg-m, 112 ± 14 ft-lb)
4) Install A.B.S. sensor harness to strut. (A.B.S. equipped models.)
Tightening torque:
152 ± 20 Nm (15.5 ± 2.0 kg-m, 112 ± 14 ft-lb)
5) Install brake hose at lower side of strut with clamp.
6) Install union bolts which secure brake caliper to brake hose.
Tightening torque:
18 ± 3 Nm (1.8 ± 0.3 kg-m, 13.0 ± 2.2 ft-lb)
CAUTION: Be sure to bleed air from brake system.
7) Install wheels.
NOTE: Check wheel alignment and adjust if necessary.
