Legacy L Wagon AWD F4-2.2L SOHC (1997)
3. Remove the snap ring from the forward clutch drum.
4. Remove the retaining plate, drive plates, driven plates and dish plate. (Overrunning clutch)
5. Compress the spring retainer, and remove the snap ring from the forward clutch, by using ST1 and ST2.
ST1 498627100 Seat or equivalent.
ST2 398673600 Compressor or equivalent.
6. Install the one-way clutch inner race to the forward clutch drum, and apply compressed air to remove the overrunning piston and forward piston.
7. Remove the one-way clutch after taking out the snap ring.
8. Remove the needle bearing after taking out the snap ring.
INSPECTION
1. Drive plate facing for wear and damage
2. Snap ring for wear, return spring for setting and breakage, and snap ring retainer for deformation
3. Lip seal and lathe cut ring for damage
4. Piston and drum check ball for operation
