Legacy L Wagon AWD F4-2.2L SOHC (1997)
Differential Mount: Service and Repair
Installation
To install, reverse the removal sequence.
1. Position front member on body by passing it under parking brake cable and securing to rear differential.
NOTE: When installing rear differential front member, do not confuse the installation sequence of the stopper.
2. Insert DOJ of rear drive shaft into rear differential.
ST 28099PA090 SIDE OIL SEAL PROTECTOR
CAUTION: Before inserting, replace the differential side oil seal and the circlip at the end of the spline shaft with a new one.
3. Installing procedure hereafter is in the reverse order of removal.
