Legacy L Wagon AWD F4-2.2L SOHC (1997)
9. Remove oil seal using ST.
ST 499705401 PULLER ASSY or equivalent.
10. Fit a new oil seal using ST.
ST 498447120 OIL SEAL INSTALLER or equivalent.
11. Install companion flange.
12. Tighten self-locking nut within the specified torque range so that the turning resistance of companion flange becomes the same as that before
replacing oil seal.
ST 498427200 FLANGE WRENCH or equivalent.
CAUTION: Use a new self-locking nut.
Tightening Torque: 181.4 +/- 14.7 Nm (133.8 +/- 10.8 ft. lbs.).
13. Reassembling procedure hereafter is the reverse of the disassembling.
