Legacy L Wagon AWD F4-2.2L SOHC (1997)
e. Remove the bolts which secure the trailing link to the rear housing.
f.
Remove the bolts which secure the front and rear lateral link to the rear housing.
g. Remove crossmember reinforcement lower (AWD Sedan only).
h. Remove the DOJ from the rear differential by using Special Tool (ST).
ST 208099PA100 DRIVE SHAFT REMOVER or equivalent.
CAUTION: When removing the DOJ from the rear differential, fit tire lever to the bolt as shown in figure so as not to damage the side
bearing retainer.
9. Secure rear drive shaft to rear crossmember using wire.
