Legacy L Wagon AWD F4-2.2L SOHC (1997)
Drive/Propeller Shaft: Service and Repair
Overhaul
Disassembly
Before removing center bearing, check its condition: If it does not operate smoothly or if there is any free play or leakage, remove as follows:
1. Put matching marks on affected parts.
2. Remove bolts which hold front propeller shaft to rear propeller shaft.
3. Place companion flange in a vise and remove stake nut.
CAUTION: Be sure not to hold propeller shaft pipe portion in the vise.
4. Drive out companion flange with a puller or press.
NOTE: Before disassembling, put matching mark on affected parts.