Legacy L Wagon AWD F4-2.2L SOHC (1997)
Axle Bearing: Service and Repair
D: Assembly
ASSEMBLY
1) Using ST, press new hub bolt into place.
CAUTION:
-
Ensure hub bolt closely contacts hub.
-
Use a 12 mm (0.47 in) hole in the ST to prevent hub bolt from tilting during installation. ST 927080000 HUB STAND
2) Remove foreign particles (dust, rust, etc.) from mating surfaces of hub and tone wheel, and install tone wheel to hub (only vehicle equipped with
A.B.S.).
CAUTION:
-
Ensure tone wheel closely contacts hub.
-
Be careful not to damage tone wheel teeth.
3) Clean housing interior completely. Using ST1 and ST2, press bearing into housing.
ST1 927430000 HOUSING STAND
ST2 927440000 BEARING REMOVER
CAUTION:
-
Always press outer race when installing bearing.
-
Be careful not to remove plastic lock from inner race when installing bearing.
-
Charge bearing with new grease when outer race is not removed.
