Legacy L Wagon AWD F4-2.2L SOHC (1997)
3. Install 2nd driven gear, 1st-2nd baulk ring and insert onto driven shaft. After installing key on driven shaft, install 3rd-4th driven gear using ST
and press. ST 499277200 Installer, or equivalent.
NOTE: Align groove in baulk ring with insert.
4. Install a set of roller bearings (42 x 74 x 40) onto the driven shaft using ST and press. ST 499277200 Installer, or equivalent.
5. Position woodruff key in groove on the rear of driven shaft. Install 5th driven gear onto drive shaft using ST and press. ST 499277200
Installer, or equivalent.
6. Install lock washer (42 x 53 x 2). Install lock nut (42 x 13) and tighten to 245 +/-10 Nm (181 +/-7 ft. lbs.). using ST. ST 499987300 Socket
Wrench (50), or equivalent.
