Legacy LSi Wagon AWD F4-2.5L DOHC (1997)
4) Install snap ring.
CAUTION: Ensure snap ring fits in groove properly.
5) Using ST1 and ST2, press outer oil seal until it comes in contact with snap ring.
ST1 927430000 HOUSING STAND
ST2 927460000 OIL SEAL INSTALLER
6) Invert both ST1 and housing.
7) Using ST2, press inner oil seal into housing until it touches bottom.
ST1 927430000 HOUSING STAND
ST2 927460000 OIL SEAL INSTALLER
8) Using ST1 and ST2, press sub seal into place.
ST1 927430000 HOUSING STAND
ST2 927460000 OIL SEAL INSTALLER
9) Apply sufficient grease to oil seal lip.
