Legacy Outback Limited AWD F4-2.5L DOHC (1998)
Right Hand Drive Model
A: REMOVAL
1. Thoroughly drain brake fluid from reservoir tank.
2. Disconnect fluid level indicator harness connector.
3. Remove brake pipes from master cylinder.
4. Remove master cylinder mounting nuts, and take out master cylinder from brake booster.
CAUTION: Be extremely careful not to spill brake fluid. Brake fluid spilt on the vehicle body will harm the painted surface; wipe it off quickly if
spilt.
B: DISASSEMBLY
Precautions for Disassembly
1. Remove mud and dirt from the surface of brake master cylinder.
2. Prepare tools necessary for disassembly operation, and arrange them neatly on work bench.
3. Clean work bench.
Disassembling Procedure
1. Remove reserve tank.
2. Remove cylinder pin. (only vehicle equipped with ABS, Antilock Brake System)