Legacy Outback Limited AWD F4-2.5L DOHC (1998)
4) Remove clamp E from pipes C and D.
5) Remove flare nuts from control valve of gearbox assembly, and then disconnect pipe C.D.
CAUTION:
-
When disconnecting pipe C-D, use two wrenches to prevent deformities.
-
Be careful to keep pipe connections free from foreign matter.
6) Remove bolt A. Disconnect pipe C from oil pump. Disconnect pipe D from oil tank.
CAUTION:
-
Do not allow fluid from the hose end to come into contact with pulley belt.
-
To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.
B: CHECK
Check all disassembled parts for wear, damage or other abnormalities Repair or replace faulty parts as required.
C: ASSEMBLY
1. LHD Model
